Titaniums`s qualities

  • Outstanding corrosion resistance

  • Superior strength-to-weight ratios

  • Low density

  • High heat-resistance

  • High heat transfer capability

  • Very good oxidation capabilities

  • High melting point

  • Low elasticity module

  • Excellent erosion resistance

  • Low thermal expansion coefficient

CHEMICAL, PHYSICAL AND MECHANICAL PROPERTIES
CHEMICAL COMPOSITION ASTM grade
(Max. Values) 1 2 5 7 9 12
N, Nitrogen 0,03 0,03 0,05 0,03 0,02 0,03
C, Carbon 0,1 0,1 0,1 0,1 0,05 0,08
H, Hydrogen 0,015 0,015 0,0125 0,015 0,013 0,015
Fe, Iron 0,2 0,3 0,4 0,3 0,25 0,3
O, Oxygen 0,18 0,25 0,20 0,25 0,12 0,25
Pd, Palladium 0,12-0,25
Al, Aliminium 5,5-6,75 2,5-3,5
Mo, Molybdenum 0,2-0,4
V, Vanadium 3,5-4,5 2,0-3,0
Ni, Nickel 0,6-0,9
Ti, Titanium Bal. Bal. Bal. Bal. Bal. Bal.
PHYSICAL PROPERTIES
Density (g/cm3) 4,51 4,51 4,43 4,51 4,48 4,51
Coeff. of thermal expansion
20-200 0C (10 -6/C) 9,1 9,1 9,9 9,1 9,8 9,9
Melting point (0C) 1671 1660 1760 1660 1704 1660
Modulus of Elasticity
(Gpa=10 9 N/mm2) 102,7 102,7 113,7 102,7 103,4 103,40
Thermal Conductivity,
at room temp. (W/m0C) 17,11 18,06 7,41 18,06 8,35 20,91
Specific heat (J/kg 0C) 5,9 5,9 5,65 5,9 5,44 5,44
Electrical resistivity
( omegamm2/m) at 20 0C 0,47 0,48 1,71 0,48 1,25 0,45
MECHANICAL PROPERTIES
Tensile strength, min (Mpa) 240,00 345,00 895,00 345,00 620,00 483,00
Yield strength, 0,2%
Offset, min (Mpa) 170,00 275,00 825,00 275,00 483,00 345,00
Elongation (in 4D, min, %) 24,00 20,00 10,00 20,00 15,00 18,00
Reduction of Area, min, % 30,00 30,00 25,00 30,00 25,00 25,00
Hardness Rb70 Rb80 Rc36 Rb80 Rc28 Rc17*
* Interpolated





GMT has a quality management
system that is in compliance with the

International Quality System Standard ISO 9001:2008

and

Aerospace Standard
AS 9100 Rev. C.